System C
Heat pumps for high power requirements
Air/water heat pumps for large-scale projects – from 20 to approx. 500 kW building heating requirements
If you have big plans, System C® is exactly the right heat pump for your project!
System C® air/water heat pumps for the high output range with natural refrigerant
System C® is suitable for solutions in all areas where high performance is required and is ideal for use in demanding environments to ensure high reliability and maximum efficiency. In addition to retail applications, apartment buildings, and commercial properties, building networks and neighborhoods can also be operated in a future-proof and highly efficient manner with System C® – both in new and existing buildings.
Intelligently networked and controllable, the system can be connected to the central building management system in all configurations and is compatible with all building management systems.
A System C® heat pump from Dimplex can supply up to 60 kW of building heating requirements. These comply with the Low Voltage Directive and are therefore intended for the simple heating of residential buildings, commercial or mixed-use properties, and smaller neighborhoods.
System C® is reversible and can be connected in parallel in up to 14 versions up to 500 kW.
The range is complemented by well-thought-out service offerings, intelligent control and the associated planning services, as well as customer-specific hydraulic solutions.
LA 2030CP and LA 4060CP
NEW: For big challenges
A System C® heat pump from Dimplex can supply up to 60 kW of heating for a building. These comply with the Low Voltage Directive and are therefore designed for the simple heating of residential buildings, commercial or mixed-use properties and smaller neighbourhoods.
System C® is reversible and up to 14 units can be connected in parallel to provide up to 500 kW.
Low sound power level
Even at high heating outputs, System C impresses with its quiet, sound-optimized operation. The power-controlled components—compressor, circulation pumps, and EC fan—are optimally coordinated in terms of sound emissions and volume flows. The resulting naturally quiet air noise does not produce any tonal sounds, even at high outputs.
High-quality design and long-lasting quality
The compact outdoor unit is visually unobtrusive thanks to its flat design, which reduces its visibility when installed on a roof, for example. Durable materials such as powder-coated sheet steel cladding have been used, and plastic parts have been avoided wherever possible. The heat exchanger is made of weather-resistant aluminum and can withstand all environmental influences.
Natural air noise
The state-of-the-art EC axial fan was modeled on an owl's wing, with its contour and structure transferred to the fan blade. The result is a low-noise blade with 100 percent speed-controllable volume flows, which ensures flow-optimized air guidance and generates a naturally quiet air noise.
Natural refrigerant
System C contains the natural refrigerant R290. It has very good thermodynamic properties. Compared to conventional refrigerants, this results in higher efficiency and improved performance – ideal for high flow temperatures (up to 70°C), which are required, for example, for renovation projects with radiators.
Safety distances for elevated installation
System C® contains the natural refrigerant R290. Due to its flammable properties, Dimplex has developed a comprehensive safety concept. The result: no additional effort during installation and maximum safety for the system operator.
In outdoor areas, the safety requirements and distances must be strictly observed for successful commissioning.
The heat pump must be installed at least 80 cm away from the wall. For wall mounting and 40 cm elevation of the heat pump, the protection area is 1 m. There must be no openings (windows, doors, ventilation outlets, etc.) or ignition sources (sockets, light switches, lamps, etc.) in this area. Building penetrations in this area must be airtight. The protection area must not extend to neighboring properties or public traffic areas.
security concept
A new innovative concept was developed for System C® in collaboration with experts. It consists of several stages and combines structural measures, electronic monitoring, and safe installation conditions.
System C® Project Planning Manual
Open the project planning manual for System CAdvantages for planners
Easy installation, reliable monitoring, flexible parallel connection
Advantages for the installer
Compact design:
High performance with a small footprint and low height; low center of gravity reduces wind resistance
The option of attaching crane eyes and the ability to drive pallet trucks or industrial trucks underneath facilitate installation; can be installed close to the ground on a foundation or steel structure
Mounting points for crane eyes are covered with caps after installation.
Option 1: Connecting the cables to the rear
This variant is suitable if the indoor unit is located at the same height as the outdoor unit in the house, e.g., in a utility room. System E is delivered ex works in this configuration.
Option 2: Connecting the cables to the front
This variant is suitable if the indoor unit is located lower than the outdoor unit in the house, e.g., in the basement.
Areas of application
Whether in large single-family homes, multi-family residential complexes, townhouses, office buildings, supermarkets, doctors' offices, workshops, shops, commercial halls, sports facilities and restaurants, craft businesses, logistics centers, schools, kindergartens, libraries, administrative buildings – System C® heat pumps can be used efficiently for heating, cooling, and hot water preparation in a wide range of areas.
New services for System C
Discover the services developed specifically for System C.
Customized system solutions
Projects with higher power requirements need more customization. In this case, Dimplex also designs targeted, customer-specific systems with the right hydraulic components and the perfect system layout, including a control concept, such as variable concepts for integrating waste heat. The customized design of the system saves time and money during installation. In addition, planning reliability is higher and quality is improved through industrial manufacturing and testing.
Minimal Footprint. Maximum Performance.
LA 33TPR
The reversible heat pump in monoblock design, which can be set up flexibly outside and uses natural refrigerant R290, meets the highest standards for sound and efficiency. Can be used for building heat requirements of up to 33 kW with a flow temperature of 64 °C for hot water temperatures of up to 60 °C and the possibility of cooling in summer - ideal for multi-family houses in new construction and renovation, with a living space of up to 750 m².
Compact Outdoor Unit
- Extremely quiet operation, thanks to the innovative speed-controlled fan and sound-optimized compressor room
- High operational safety thanks to controlled condensate drainage with energy-efficient condensate tray heating and safety devices in the refrigeration circuit
- LA 33TPR achieves energy efficiency class A++ in a low temperature application
- Easy connection to the wall-mounted controller via bus system
Modular Hydraulic Station as a heating Center.
Dimplex offers an optimal solution for residential complexes, office complexes, supermarkets and other commercial facilities: The modular hydraulic station is delivered ready-piped and wired.
Individually planned, modularly constructed, manufactured to industrial standards and installed extremely quickly, it contains all the necessary hydraulic and control components for heating and cooling buildings with a heat requirement of up to 500 kW. A powerful heat pump creates a future-proof, regenerative overall system. Optionally including heat recovery, e.g. by using industrial waste heat.
- 30 to 500 kW heating/cooling output
- 5 to 70 m³/h volume flow
- + 7 to + 60 °C temperature range
- ~ 300 kg weight per module
- Stainless steel or steel/black welded pipes
- Cold/heat insulation