Ventilation in the system. With M Flex Air.
The central ventilation system.
Visually and technically, from a single source.
Perfected in the system
Heating, cooling and ventilation in a single unit.
Finally: a uniform look in the plant room for all heating and ventilation technology. The central ventilation module is designed for ventilating detached houses with a maximum living area of approximately 250 m².
Within the system network, M Flex Air can be combined with all M system heat pumps, including domestic hot water production and the Air 56 air distribution system.
Central residential ventilation unit M Flex Air
- Can be used as a stand-alone module or combined with System M heat pumps in a system network
- Air directions interchangeable: floor-standing or wall-mounted, vertical or horizontal orientation.
- With heat recovery
- For up to 250 square metres
Central residential ventilation unit M Flex Air Plus
- Can be used as a stand-alone module or combined with System M heat pumps in a system network
- Air directions can be reversed. Floor-standing or wall-mounted, vertical or horizontal alignment
- With heat recovery for up to 250 square metres
- Includes humidity recovery via enthalpy exchanger
Well-being factor: ventilation.
People spend nearly 90% of their lives indoors. Their comfort depends largely on the quality of the indoor air. Modern, energy-efficient homes must be insulated. The building envelope is therefore becoming increasingly airtight. To ensure sufficient air exchange in your home and a healthy indoor climate, regular ventilation is necessary. The best solution is to use a centralised ventilation system from Dimplex, which also provides heating, hot water or air conditioning in summer.
Fully integrated into the design
Like the entire system, the ventilation module also impresses with its typical Dimplex design, which has already received numerous internationally recognised design awards.
Flexible installation
Interchangeable air directions with supply air connection on the left or right ensure great installation flexibility.
The integrated electric heater provides increased comfort when outside temperatures are low. The integrable electric preheater is used for safe and consistent operation of heat recovery in winter.
Ventilation.
Various configurations.
Maximum installation freedom.
With a grille measuring 53.4 x 56.0 cm, M Flex Air fits perfectly with System M heat pump indoor units. Depending on the configuration, the ventilation module can be placed vertically to the left of the indoor unit or horizontally above it. The air direction can be selected to the left or right.
M for
Modular.
Advanced audio technology
Thanks to the latest generation of fans and the perfect interaction of all structural components, very little noise is emitted into the environment.
The elevated structure of the ventilation module also helps to reduce noise entering the air ducts.
Air Quality Assurance
People with allergies can finally breathe easy: thanks to the standard integrated pollen filter and the optional fine particle filter, pollen, fine dust and soot particles don't even make it into the living and sleeping areas. The filter cascade is used as an option for pre-filtration in the outside air intake. And the air quality sensors, which come as standard even in the outside air, temporarily reduce the air exchange rate when the air quality is poor.
All of this has a positive effect on well-being and promotes healthy sleep and concentration. And the ventilation system itself? It operates almost silently.
Comfort functions.
Integrated as standard.
- Air quality sensors in the exhaust air and even in the outside air.
- The orientation of the air connections can be selected (air blown to the left or right).
- The chimney safety function for balancing the volume flow can be activated.
- Pollen filter.
Comfort functions.
Can be integrated as an option.
- Moisture recovery with enthalpy heat exchanger.
- Electric outdoor air heater damper.
- Electric supply air heater damper.
- Filter cascade including a pre-filter in the outdoor air inlet.
- Condensate trap with dry-run protection and vacuum protection.
- Condensate drain for use in air-conditioned buildings.
For the entire system
A service
In combination with System M heat pumps, the ventilation system is controlled via the touchscreen on the heat pump's indoor unit or via the Dimplex Home app on a smart device (smartphone or tablet).
All functions (ventilation, heating and cooling) are perfectly coordinated and work together optimally. This ensures that heating, ventilation or cooling is always at the optimum level.
For each construction project
The right system
M Flex Air is available in two versions: Standard and Plus. The Plus version is factory-fitted with an enthalpy heat exchanger for additional humidity recovery.
This ensures optimum comfort in both summer and winter.
Go directly to the products:
Correspondence: the Air 56 air distribution system.
The intelligent air distribution system consists of just a few components that can be combined as desired. Whether installed in the ceiling, in concrete or in insulation, the uniform 56 mm diameter of the pipes makes the air distribution system extremely flexible in use and space-saving. Installation is easy thanks to the snap-in principle, which also ensures a perfectly sealed connection between all components.
Customised ventilation systems. Plan your ventilation with Dimplex.
We can advise you on the selection of the appropriate system and assist you with planning and commissioning on site. For planning purposes, we require information about the building, floor plans, and views and sections.
Bien conseillé
Vous avez des questions ? Il vous suffit de nous contacter en utilisant notre formulaire de contact !